Category » Hidden Options
Sage MAS 90 and 200 Hidden Options
There were 38 questions found in this category:
"An error {-5009: 0x8002802b} has occured while running the setup."
An error 5006 and/or 5009 occured while running the setup.Try the following two solutions:1. Run the setup from the add/remove programs option (especially if this is a Citrix/Terminal Server environment)2. Go to the c:\program files\common files\installshield and delete the folder (to be on the ...- *UTL secret MAS 90 and MAS 200 version 4 file repair or rebuild utility or utilities
Beginning with Service Update 3 for Sage MAS 90 and 200 Version 4.10 there is a set of secret and little documented utilities to fix some error conditions within the software.The utility has not yet be incorporated into version 4.20.1. Correct Data for Balance Forward Custoemrs2. Re-Create Cust ...
- Can I run Sage MAS 200 as if it were a standalone installation of Sage MAS 90?
It is possible to run Sage MAS 200 as if it were operating as Sage MAS 90? The main difference is that you will give up the processing speed because all data will be processed at the workstation instead of the server as it would be under Sage MAS 200. Sometimes for debugging purposes you might w ...
- Cash receipts show as already being applied to an invoice in cash receipts data entry
Applies to: All versions of Sage MAS 90 and 200When applying cash to invoices in accounts receivable, I noticed that an invoice looks as if it is already being paid. If I look at it it via either an aged invoice report or customer maintenance then the invoice is still outstanding.This is a know ...
- Data conversion could not be performed in the following module(s) due to missing data version information in the following modules.
After converting some data files from earlier levels of Sage MAS 90 or 200, some (or all) companies may show with the error message:"Data conversion could not be performed for the following companies due to missing data version information in the indicated module"The a list of module/companies f ...
- Error 43 Format Mask Invalid Logging into Sage MAS 90 or MAS 200 v4.xx
When one user tries to log into Sage MAS 90 or MAS 200 they receive the message "Error 43 Format Mask Invalid" and are unable to access the system.Other users can continue to work in MAS 90 or MAS 200.New users can be created but when they log in they receive the error message "Error 43 Format M ...
- Error 54 Unable to Load Error Handler
Error 54 Unable to Load Error HandlerThere can be several reasons for this. Most commonly if this happens in a multi-user environment and nobody can access Sage MAS 90 or 200 then you should reboot your file server as the cause is most likely a locked data file.Other issues that can cause this ( ...
- Error 88 SY_Rebuild_BUS.PVC 591
Error 88 SY_Rebuild_BUS.PVC 591 occurs when trying to rebuild key files in Sage MAS 90 v4.10 SU 16.Resolution:Manually register Pvxdax.dll file. In version 4.10 and earlier, the file is located in the ..\Mas90\Home\ folder. In version 4.20 and later, the file is located in the ..\program files\ ...
- Files remain locked after posting - may cause error messages that certain files cannot be deleted
After posting transactions within Sage MAS 90 or 200, in rare instances the data entry file may not be deleted properly by Sage MAS 90 or 200.Update: Users of McAffee Enterprise should visit this link for a patch that curse this issue.Typically you'll get some type of message indicating the file ...
- How can I lock or unlock the ability for users to customize lookups (ALE) on Sage MAS 90 or MAS 200
If you want to stop users from modifying lookups (aka Advanced Lookup Engine or ALE) you can go to Library Master - Main - User Lookup Maintenance.From this screen, select the lookup to maintain, user the NEXT button to move through the different modification screens (make any needed changes) un ...
- How can I make a one-sided adjusting journal entry?
One sided journal entries are possible with Sage MAS 90 or 200 so long as you are logged in as a user with supervisor rights (Note: These supervisor rights must be Sage MAS 90 supervisor rights - NOT your network rights).Version 3.x and earlierThrough Library Master - User Maintenance - check th ...
- How can I purge cleared Bank Reconciliation transactions?
Verify that the "Out of Balance" line in Reconcile Bank is $0.00 Print the Bank Reconciliation Register with the following criteria:Select a single bank code. The purge option only appears if "All" bank codes are selected. "Transaction type to print" must be "All Types". "Print cleared transacti ...
- How can I set a default value for order status (or other fields) in Sage MAS 90 or 200 v4.xx
In the Sales Oder module (version 4.20) is there a way to default the Order Status to something other than New? Going in through Custom Office appears to allow you to set the status but it does not work when you test it.Use the following procedure to set the default values for v4.xx standard mod ...
- How do I create a test company within Sage MAS 90 or 200?
Test companies are useful for trying new features without impacting your live data. What users typically do is use the options within Sage MAS 90 or 200 to copy their entire live data over to a new company (often labeled TST) and try the transaction(s) there first before committing them to a liv ...
- How do I set up the application server in Sage MAS 200 version 4.xx?
This tip is only relevant to the Sage MAS 200 version 4+In Version 4 there are many places, unlike Level 3 where a UNC path is executed from the server itself instead of the client. For example, when adding a new report in Report Manager, or browsing through Data File Display and Maintenance, or ...
- How to create a silent Sage MAS 90 or 200 ODBC connection which does not require constant login
Is there a way to stop the ODBC connection from asking for the Sage MAS 90 or 200 company code, user and password each time it is used?Yes, the most common way uses one of the two methods:Method #1: Create an ODBC connection and supply the user code, password and company within the connection in ...
- How to move or copy Sage MAS 90 or 200 to a new location
Things You'll Need:Original Sage MAS 90 or 200 program disksInstalled Application Listing from within Sage MAS 90 or 200 so you can see if any enhancements are displayed on the list.Program disks for all enhancementsCopy of your Sage MAS 90 or 200 Registration KeysTip: If you do not know whether ...
- How to tell if you are logged in as a local administrator.
If you need to quickly tell if the person currently logged onto a PC is a local administrator of the Windows server, right click on the START button. If you see "Open All Users" (toward the bottom of the list of items) rather than just "Open," the account is in the local Administrators group.
- Is there a listing of Providex error codes and their meanings available online?
You may access an online list of Providex (PVX) error codes and their meanings via the following link:Providex Error Codes
- Is there an SVXBLD-like utility that works in 4.x?
Warning: RED ALERT RED ALERT - Make a backup of your SY0CTL.SOA before even thinking about attempting this. If your SY0CTL.SOA is damaged in this process, you will not be able to log into your Sage MAS 90 or 200 system. You've been warned. It wouldn't be a bad idea to make 2 backups.Go to Mas90\ ...